DRIK-O-MAT®

• No blind corners here, so the bowl is kept clean all the time.
• The water nipple is placed at the bottom of the bowl and releases only the amount of water that is actually drunk.
• In this way you will achieve considerable water savings, and again a considerable reduction in the quantity of slurry.

DRIK-O-MAT® - easy mounting

DRIK-O-MAT® can be delivered with either short or long water pipe, length: 120 cm. Short water pipe for Micro and Mini is 19.5 cm long for Standard, Multi and Maxi 24.5 cm long.

For non-frost-free buildings, Standard, Multi and Maxi DRIK-O-MAT® can be supplied with water circulation pipe.

DRIK-O-MAT® is delivered with: Adjustable drinking niipple, SS water pipe with 1/2" female thread, 6 x 16 mm screws with nut.

Acessories can be delivered for mounting on wall or partition. For Mini, 2 screws are required and for Standard, Multi and Maxi, 3 screws.